Click image to view full size image
Zinc alloy Die-casting with spray-paint on surface. Socket type:75ohm,3/8" -32UNEF. Installing simply, hole's positions at the two sides fix main bady.
| Description: | Indoor SAT Splitter | ||||||
| Electrical Specification | |||||||
| Item | 2 way splitter | 3 way splitter | 4 way splitter | 6 way splitter | 8 way splitter | ||
| Insertion Loss | -dB (Max) | ||||||
| 5 MHz - 47 MHz | 4 | 6.5 | 7.5 | 11.0 | 11.5 | ||
| 47MHz - 950MHz | 4.5 | 7.5 | 8.5 | 12.0 | 13 | ||
| 950MHz - 2150 MHz | 6 | 9.0 | 11.0 | 14.0 | 15 | ||
| 2150 MHz - 2400MHz | 6.5 | 10.0 | 12.0 | 16.0 | 16.5 | ||
| Isolation Loss | -dB (Min.) | ||||||
| 5 MHz - 47 MHz | 18 | 18 | 18 | 18 | 18 | ||
| 47MHz - 950MHz | 18 | 18 | 18 | 18 | 18 | ||
| 950MHz - 2150 MHz | 18 | 18 | 18 | 18 | 18 | ||
| 2150 MHz - 2400MHz | 18 | 18 | 18 | 18 | 18 | ||
| Return Loss (IN/OUT) | -dB (Min.) | ||||||
| 5 MHz - 47 MHz | 12 | 12 | 12 | 12 | 12 | ||
| 47MHz - 950MHz | 12 | 12 | 12 | 12 | 12 | ||
| 950MHz - 2150 MHz | 12 | 12 | 12 | 12 | 12 | ||
| 2150 MHz - 2400MHz | 12 | 12 | 12 | 12 | 12 | ||
| General Information | |||||||
| Impedance | 75 Ohms | ||||||
| RFI Shielding | - 120 dB | ||||||
| Intermodulation | better than -45dBmV | ||||||
| Test Enviroment:Room Temperature: +20ºC | |||||||
| Other Requirement : | |||||||
| 1. Plastic insert to be in white colour. | |||||||
| 2. Cap of F port to be in clear white colour | |||||||
| 3. Grounding screw to be 4 x 12 mm in green, 1/4 hex, open flat slot, philips. | |||||||
| 4. Fixing screw to be 4 x 18 mm in sheet metal, 1/4 hex, open flat slot, Philips. | |||||||
| 5. Housing to be bright tin plated | |||||||
| 6.Threads of F-PORT use 3/8"-32 UNEF-2B. | |||||||